게시글 주소 : http://moneywars.co.kr/?document_srl=3656
天과地
nbtstat.exe
Displays protocol statistics and current TCP/IP connections using NBT (NetBIOS over TCP/IP). NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n] [-r] [-R] [-RR] [-s] [-S] [interval] ] -a (adapter status) Lists the remote machine's name table given its name -A (Adapter status) Lists the remote machine's name table given its IP address. -c (cache) Lists NBT's cache of remote [machine] names and their IP addresses -n (names) Lists local NetBIOS names. -r (resolved) Lists names resolved by broadcast and via WINS -R (Reload) Purges and reloads the remote cache name table -S (Sessions) Lists sessions table with the destination IP addresses -s (sessions) Lists sessions table converting destination IP addresses to computer NETBIOS names. -RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts Refr esh RemoteName Remote host machine name. IP address Dotted decimal representation of the IP address. interval Redisplays selected statistics, pausing interval seconds between each display. Press Ctrl+C to stop redisplaying statistics.
netstat.exe
프로토콜 통계 및 현재 TCP/IP 네트워크 연결을 표시합니다. NETSTAT [-a] [-b] [-e] [-n] [-o] [-p 프로토콜] [-r] [-s] [-v] [시간] -a 모든 연결 및 수신 대기 포트를 표시합니다. -b 각 연결 또는 수신 대기 포트를 만드는 데 관련된 실행 프로그램을 표시합니다. 잘 알려진 실행 프로그램에서 여러 독립 구성 요소를 호스팅하는 경우에는 연결 또는 수신 대기 포트를 만드는 데 관련된 구성 요소의 시퀀스가 표시됩니다. 이런 경우에는 실행 프로그램 이름이 아래쪽 대괄호 안에 표시되어 있고 위에는 TCP/IP에 도달할 때까지 호출된 구성 요소가 표시되어 있습니다. 이 옵션은 시간이 오래 걸릴 수 있으며 사용 권한이 없으면 실패합니다. -e 이더넷 통계를 표시합니다. 이 옵션은 -s 옵션과 같이 사용될 수 있습니다. -n 주소 및 포트 번호를 숫자 형식으로 표시합니다. -o 각 연결의 소유자 프로세스 ID를 표시합니다. -p 프로토콜 지정한 프로토콜에 해당되는 연결을 표시합니다. 프로토콜은 TCP, UDP, TCPv6 또는 UDPv6 중 하나입니다. -s 옵션과 함께 사용하여 프로토콜별 통계를 표시할 경우 프로토콜은 IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP 또는 UDPv6 중 하나입니다. -r 라우팅 테이블을 표시합니다. -s 프로토콜별로 통계를 표시합니다. 기본값으로 IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP 및 UDPv6에 관한 통계를 표시합니다. -p 옵션을 함께 사용하면 기본값의 일부 집합에 대한 통계만 표시할 수 있습니다. -v -b 옵션과 함께 사용하면 모든 실행 프로그램에 대한 연결 또는 수신 대기 포트를 만드는 데 관련된 구성 요소의 시퀀스를 표시합니다. 시간 다음 화면으로 이동하기 전에 지정한 시간 동안 선택한 통계를 다시 표시합니다. 통계 표시를 중단하려면 CTRL+C를 누르십시오. 지정하지 않으면 현재 구성 정보를 한 번 표시합니다.
arp.exe
Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP). ARP -s inet_addr eth_addr [if_addr] ARP -d inet_addr [if_addr] ARP -a [inet_addr] [-N if_addr] -a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. -g Same as -a. inet_addr Specifies an internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -d Deletes the host specified by inet_addr. inet_addr may be wildcarded with * to delete all hosts. -s Adds the host and associates the Internet address inet_addr with the Physical address eth_addr. The Physical address is given as 6 hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies a physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used. Example: > arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry. > arp -a .... Displays the arp table.
ipconfig.exe
USAGE: ipconfig [/? | /all | /renew [adapter] | /release [adapter] | /flushdns | /displaydns | /registerdns | /showclassid adapter | /setclassid adapter [classid] ] where adapter Connection name (wildcard characters * and ? allowed, see examples) Options: /? Display this help message /all Display full configuration information. /release Release the IP address for the specified adapter. /renew Renew the IP address for the specified adapter. /flushdns Purges the DNS Resolver cache. /registerdns Refreshes all DHCP leases and re-registers DNS names /displaydns Display the contents of the DNS Resolver Cache. /showclassid Displays all the dhcp class IDs allowed for adapter. /setclassid Modifies the dhcp class id. The default is to display only the IP address, subnet mask and default gateway for each adapter bound to TCP/IP. For Release and Renew, if no adapter name is specified, then the IP address leases for all adapters bound to TCP/IP will be released or renewed. For Setclassid, if no ClassId is specified, then the ClassId is removed. Examples: > ipconfig ... Show information. > ipconfig /all ... Show detailed information > ipconfig /renew ... renew all adapters > ipconfig /renew EL* ... renew any connection that has its name starting with EL > ipconfig /release *Con* ... release all matching connections, eg. "Local Area Connection 1" or "Local Area Connection 2"
net.exe
NET [ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP | HELPMSG | LOCALGROUP | NAME | PAUSE | PRINT | SEND | SESSION | SHARE | START | STATISTICS | STOP | TIME | USE | USER | VIEW ]
tracert.exe
Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name Options: -d Do not resolve addresses to hostnames. -h maximum_hops Maximum number of hops to search for target. -j host-list Loose source route along host-list. -w timeout Wait timeout milliseconds for each reply.
nslookup.exe
Commands: (identifiers are shown in uppercase, [] means optional) NAME - print info about the host/domain NAME using default server NAME1 NAME2 - as above, but use NAME2 as server help or ? - print info on common commands set OPTION - set an option all - print options, current server and host [no]debug - print debugging information [no]d2 - print exhaustive debugging information [no]defname - append domain name to each query [no]recurse - ask for recursive answer to query [no]search - use domain search list [no]vc - always use a virtual circuit domain=NAME - set default domain name to NAME srchlist=N1[/N2/.../N6] - set domain to N1 and search list to N1,N2, etc. root=NAME - set root server to NAME retry=X - set number of retries to X timeout=X - set initial time-out interval to X seconds type=X - set query type (ex. A,ANY,CNAME,MX,NS,PTR,SOA,SRV) querytype=X - same as type class=X - set query class (ex. IN (Internet), ANY) [no]msxfr - use MS fast zone transfer ixfrver=X - current version to use in IXFR transfer request server NAME - set default server to NAME, using current default server lserver NAME - set default server to NAME, using initial server finger [USER] - finger the optional NAME at the current default host root - set current default server to the root ls [opt] DOMAIN [> FILE] - list addresses in DOMAIN (optional: output to FILE) -a - list canonical names and aliases -d - list all records -t TYPE - list records of the given type (e.g. A,CNAME,MX,NS,PTR etc.) view FILE - sort an 'ls' output file and view it with pg exit - exit the program